Keithley 2700 User Manual

10
Remote Operations
• Operation enhancements — Summarizes some of the more important operations
that can only be performed using remote operation.
• GPIB setup — Covers GPIB bus standards, selecting the GPIB, primary address
selection, and bus connections.
• General bus commands — Describes general bus commands used for
fundamental GPIB control.
• Front panel GPIB operation — Summarizes GPIB error messages, status
indicators, and using the LOCAL key.
• Programming syntax — Describes the basic programming syntax for both
common and SCPI commands.
• RS-232 interface operation — Outlines use of the RS-232 interface to control the
Model 2700.

Keithley 2700 Specifications

General

Type	Digital Multimeter
Measurement Functions	DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Frequency Range	3 Hz to 500 kHz
Temperature Range	-200°C to +1372°C
Display	Vacuum Fluorescent Display
Connectivity	IEEE-488, RS-232
Channels	10
Power Supply	100V to 240V AC, 45Hz to 66Hz
DC Current Range	10 µA to 3 A
AC Current Range	10 µA to 3 A
Temperature Measurement	Thermocouple, RTD