Keysight N9010A EXA Service Guide 131
Instrument Messages
Condition Errors 301 to 399, Uncalibrated Integrity
311 Calibration; ENR table
extrapolated
W One or more calibration or measurement
frequency points exceed the currently loaded Cal
or Meas ENR Table frequency ranges. The
corresponding ENR table’s lowest frequency ENR
value will be re-used for frequencies less than the
table range, and the highest frequency ENR value
will be re-used for frequencies greater than the
table range.
(~ENR)
311 Calibration; No ENR data
present
W No ENR Data (ENR)
313 unused bit6 is set W
315 unused bit7 is set W
317 unused bit8 is set W
319 unused bit9 is set W
321 unused bit10 is set W
323 unused bit11 is set W
325 unused bit12 is set W
327 unused bit13 is set W
329 unused bit14 is set W
To Next Page
Loading...
Need help?
General
