Keysight Technologies X Series Service Guide

463
Keysight Technologies X-Series Signal Analyzers
N9010A EXA Signal Analyzer
Service Guide
15 Assembly Replacement Procedures
What You Will Find in This Chapter
Procedures in this chapter enable you to locate, remove, and replace the
following major assemblies in your instrument.
Refer to Chapter 14, “Replaceable Parts.” for part numbers, assembly
descriptions, and ordering information.
“Instrument Outer Case” on page 467
“Top Brace and Reference Bracket” on page 472
“RF Area (Option 503, 507, 513, 526)” on page 474
“RF Area (Option 532, 544)” on page 506
“RF Front End Assembly - Options 503, 507, 513, 526” on page 521
“RF Front End Assembly - Options 532, 544” on page 523
“Front End Control Assembly” on page 525
“L.O. Synthesizer Assembly” on page 528
“Rear Panel” on page 530
“Reference Assembly” on page 531
“Power Supply Assembly” on page 536
“CPU Assembly” on page 539
“Disk Drive” on page 542
“Analog I.F. (AIF)/Digital I.F. (DIF) Assembly” on page 555
“Midplane Assembly” on page 560
“Motherboard Assembly” on page 563
“Fan Assembly” on page 568
“Input Connector Assembly” on page 571
“Front Frame Assembly” on page 573
“Display Assembly - LCD” on page 580
“Display Assembly - LED” on page 589

Keysight Technologies X Series Specifications

General

Brand	Keysight Technologies
Model	X Series
Category	Measuring Instruments
Language	English