568 Keysight N9010A EXA Service Guide
Assembly Replacement Procedures
Fan Assembly
Fan Assembly
Removal
1. Remove the instrument outer case. Refer to the Instrument Outer Case
removal procedure.
2. Remove the top brace. Refer to the Top Brace and Reference Bracket
removal procedure.
3. Remove the Front Frame Assembly. Refer to the Front Frame Assembly
removal procedure.
4. Refer to Figure 15-84. Remove the eight screws (1) that attach the fan
assembly to the chassis.
Figure 15-84 Fan Assembly Removal
5. Unplug the fan wires from the motherboard. The fan assembly can now be
lifted from the chassis.
To Next Page
Loading...
