138 Keysight N9010A EXA Service Guide
Instrument Messages
Condition Errors 801 to 899, Temperature
Condition Errors 801 to 899, Temperature
Errors with instrument internal temperatures.
An event with the error number shown in the table means the condition has
been detected.
When the condition is cleared, an event with the error number plus 1000 is
generated.
For example, error 801 indicates that the Ref Osc Oven Cold condition has
been detected; error 1801 indicates that condition has been cleared.
An E in the Error or Warning column means that an error is put up on the front
panel and sent out to SCPI when this condition is detected. A W in this column
means that a Warning is put up on the front panel but nothing goes out to
SCPI. Nothing in this column means nothing is put up; status bit only.
Err# Message Error or
Warning
Verbose/Correction Information
801 Reference Oscillator Oven
Cold
W
803 unused bit1 is set
805 unused bit2 is set
807 unused bit3 is set
809 unused bit4 is set
811 unused bit5 is set
813 unused bit6 is set
815 unused bit7 is set
817 unused bit8 is set
819 unused bit9 is set
821 unused bit10 is set
823 unused bit11 is set
825 unused bit12 is set
827 unused bit13 is set
829 unused bit14 is set
To Next Page
Loading...
Need help?
General
