Keysight N9010A EXA Service Guide 21
Overview
Before You Start Troubleshooting
Before You Start Troubleshooting
Before troubleshooting, complete the following tasks:
— Familiarize yourself with the safety symbols marked on the instrument and
read the general safety considerations in the front of this guide.
— Read the ESD information below.
— Familiarize yourself with the troubleshooting information in Chapter 2,
“Boot Up and Initialization Troubleshooting.”, and how it relates to
information on troubleshooting the other assemblies.
These servicing instructions are for use by qualified personnel only. To avoid electrical shock, do
not perform any servicing unless you are qualified to do so.
The opening of covers or removal of parts is likely to expose dangerous voltages. Disconnect the
product from all voltage sources while it is being opened.
The detachable power cord is the instrument disconnecting device. It disconnects the mains
circuits from the mains supply before other parts of the instrument. The front panel switch is only
a standby switch and is not a LINE switch (disconnecting device).
Always position the instrument for easy access to the disconnecting device (detachable power
cord).
To prevent electrical shock, disconnect the analyzer from mains before cleaning. Use a dry cloth
or one slightly dampened with water to clean the external case parts. Do not attempt to clean
internally.
This is a Safety Class 1 Product (provided with a protective earthing ground incorporated in the
power cord). The mains plug shall only be inserted in a socket outlet provided with a protective
earth contact. Any interruption of the protective conductor inside or outside of the product is
likely to make the product dangerous. Intentional interruption is prohibited.
To Next Page
Loading...
Need help?
General
