Keysight Technologies X Series Service Guide

395
Keysight Technologies X-Series Signal Analyzers
N9010A EXA Signal Analyzer
Service Guide
14 Replaceable Parts
What You Will Find in This Chapter
1. Part number tables for assemblies, mechanical parts, cables, front panel
connectors, and labels.
2. Part location diagrams for the following:
Figure 14-1, “Major Assemblies,”
Figure 14-2, “External Hardware (Benchtop Configuration),”
Figure 14-3, “External Hardware and Bail Handle (Option PRC),”
Figure 14-4, “External Hard ware (Option PRC),”
Fig 14-5 and Fig 14-6 CPU Assembly on page 419 and page 420
Figure 14-7, “Disk Drive Tray Assembly (Option PC2, PC3, PC4, and PC5),”
Figure 14-8, “Top Brace and Reference Bracket,”
Figure 14-9, “RF Area - Standard Instrument,”
Figure 14-10, “RF Area - Option 532, 544,”
Figure 14-11, “RF Area - Options B40, MPB, or DP2,”
Figure 14-12, “RF Area - Option 532, 544 with Option B40, MPB, or DP2,”
Figure 14-13, “RF Area - Options B40, MPB, or DP2 (switch detail),”
Figure 14-14, “RF Area - Option 532, 544 with Option B40, MPB, or DP2
(switch detail),”
Figure 14-15, “Front End Parts - Standard Instruments,”
Figure 14-16, “Front End Parts - Option 532, 544,”
Figure 14-17, “Front End Parts - Options MPB, B40, DP2, CR3, or CRP,”
Figure 14-18, “Front End Control Cables - early serial numbers,”
Figure 14-19, “Front End Control Cables - later serial numbers,”
Figure 14-20, “Front End Control Cables - Options B40, MPB, DP2, CR3, or
CRP,”
Figure 14-21, “Reference Board Cables - Instruments without Option B40,
MPB, or DP2 Serial Number < MY/SG/US56480000,”

Keysight Technologies X Series Specifications

General

Brand	Keysight Technologies
Model	X Series
Category	Measuring Instruments
Language	English