Kia Optima 2017 - Power Window Lock Button

2. Close the window and continue
pulling up the power window switch
for at least 1 second after the win‐
dow is completely closed.
OUN026013
Automatic reversal (For Type B)
If the upward movement of the window
is blocked by an object or part of the
body, the window will detect the resist‐
ance and will stop upward movement.
The window will then lower approxi‐
mately 30 cm (11.8 in.) to allow the ob‐
ject to be cleared.
If the window detects the resistance
while the power window switch is
pulled up continuously, the window will
stop upward movement then lower ap‐
proximately 2.5 cm (1 in.).
And if the power window switch is
pulled up continuously again within 5
seconds after the window is lowered by
the automatic window reversal feature,
the automatic window reversal will not
operate.
NOTICE
The automatic reverse feature for
the window is only active when the
󳱷auto up󳱸 feature is used by fully
pulling up the switch. The automatic
reverse feature will not operate if
the window is raised using the half‐
way position on the power window
switch.
WARNING
Always check for obstructions be‐
fore raising any window to avoid in‐
juries or vehicle damage. If an object
less than 4 mm (0.16 in.) in diameter
is caught between the window glass
and the upper window channel, the
automatic reverse window may not
(Continued)
(Continued)
detect the resistance and will not
stop and reverse direction.
Power window lock button
OJF045018
The driver can disable the power win‐
dow switches on the rear passenger󳱴s
doors by pressing the power window
lock button to the lock position (press‐
ed).
When the power window lock button is
pressed:
4-39
4
Features of your vehicle