Adjusting the height up and down (if
equipped)
To raise the headrest, pull it up to the
desired position (1). To lower the head‐
rest, push and hold the release button
(2) on the headrest support and lower
the headrest to the desired position (3).
CAUTION
When there is no occupant in the
rear seats, adjust the height of the
headrest to the lowest position. The
(Continued)
(Continued)
rear seat headrest can reduce the
visibility of the rear area.
Removal and installation (if equipped)
To remove the headrest, raise it as far
as it can go then press the release but‐
ton (1) while pulling upward (2).
To reinstall the headrest, put the head‐
rest poles (3) into the holes while
pressing the release button (1). Then
adjust it to the appropriate height.
WARNING
Make sure the headrest locks in po‐
sition after adjusting it to properly
protect the occupants.
Armrest
To use the armrest, pull it forward
from the seatback.
Folding the rear seat (if equipped)
The rear seatbacks may be folded to
facilitate carrying long items or to in‐
crease the luggage capacity of the ve‐
hicle.
Safety features of your vehicle
3-14
To Next Page
Loading...
