To cancel the Auto Hold operation,
press the Auto Hold switch. The AUTO
HOLD indicator will go out.
To cancel the Auto Hold operation when
the vehicle is at a standstill, press the
Auto Hold switch while depressing the
brake pedal.
NOTICE
• The Auto Hold does not operate
when:
- The driver's seat belt is unfas‐
tened and driver's door is
opened
- The engine hood is opened
- The shift lever is in P (Park) or R
(Reverse)
- The EPB is applied
• For your safety, the Auto Hold au‐
tomatically switches to EPB in
such cases:
- The driver's seat belt is unfas‐
tened and driver's door is
opened
- The engine hood is opened
- The vehicle is in a standstill for
more than 10 minutes
(Continued)
(Continued)
- The vehicle is standing on a
steep slope
- The vehicle moved several
times
In these cases, the brake warning
light comes on, the AUTO HOLD in‐
dicator changes from green to
white, and a warning sounds and a
message will appear to inform you
that EPB has been automatically
engaged. Before driving off again,
press foot brake pedal, check the
surrounding area near your vehicle
and release parking brake manual‐
ly with the EPB switch.
• If the AUTO HOLD indicator lights
up yellow, the Auto Hold is not
working properly. We recommend
that the you contact an author‐
ized Kia dealer.
• While operating Auto Hold, you
may heard mechanical noise. How‐
ever, it is normal operation noise.
6-47
6
Driving your vehicle