• If a traffic sign that is relevant to
your vehicle is passed, the system
displays the information of the speed
limits and no passing restrictions to
the driver.
• When the driver turns on the ignition,
the system displays stored informa‐
tion of the speed limit before turn off
the ignition.
• Sometimes different speed limits are
displayed for the same road. The in‐
formation displayed depending on
the situation. Because, traffic signs
with additional signs (e.g rainy, ar‐
row...) are also detected and com‐
pared with vehicle interior data (e.g
wiper operation, turn signal...).
• The system can update the speed
limit information without visible
speed limit signs in the following sit‐
uations.
- When you change your driving di‐
rection with right or left or U turn‐
ing.
- When vehicle changes roads. (e.g.
from highway to country road…)
- When you enter or exit into town
or village.
NOTICE
If speed limit value has the differ‐
ence between cluster and naviga‐
tion, check the speed unit setting in
navigation.
Display
• If the system doesn’t have a reliable
speed limit information, the following
symbol is displayed in both the in‐
strument cluster and navigation
screen.
To Next Page
Loading...
