The hazard warning flasher serves as a
warning to other drivers to exercise ex‐
treme caution when approaching, over‐
taking, or passing your vehicle.
It should be used whenever emergency
repairs are being made or when the ve‐
hicle is stopped near the edge of a
roadway.
Depress the flasher switch with the ig‐
nition switch in any position. The flash‐
er switch is located in the center con‐
sole switch panel. All turn signal lights
will flash simultaneously.
• The hazard warning flasher operates
whether your vehicle is running or
not.
• The turn signals do not work when
the hazard flasher is on.
• Care must be taken when using the
hazard warning flasher while the ve‐
hicle is being towed.
What to do in an emergency
7-02
To Next Page
Loading...
