Kia Optima 2017 - To Adjust the Sensitivity of Smart Cruise Control

CAUTION
• Do not install accessories around
the sensor and do not replace the
bumper by yourself. It may inter‐
fere with the sensor performance.
• Always keep the sensor and
bumper clean.
• To prevent sensor cover damage
from occurring, wash the car with
a soft cloth.
• Do not damage the sensor or sen‐
sor area by a strong impact. If the
sensor moves slightly off position,
the advanced smart cruise control
system will not operate correctly
without any warning or indicator
from the cluster.
If this occurs, we recommend that
the system be checked by an au‐
thorized Kia dealer.
• Use only a genuine Kia sensor cov‐
er for your vehicle. Do not paint
anything on the sensor cover.
To adjust the sensitivity of
smart cruise control
OJF055101L
The sensitivity of vehicle speed when
following the front vehicle to maintain
the set distance can be adjusted. Go to
the User Settings Mode (Driving Assist)
and select SCC (Smart Cruise Control).
You may select one of the three stages
you prefer.
• Slow:
Vehicle speed following the front ve‐
hicle to maintain the set distance is
slower than normal speed.
• Normal:
Vehicle speed following the front ve‐
hicle to maintain the set distance is
normal.
• Fast:
Vehicle speed following the front ve‐
hicle to maintain the set distance is
faster than normal speed.
NOTICE
The last selected mode is remained
in the system.
Driving your vehicle
6-90