2. Compress the clip and slide the
blade assembly downward.
3. Lift it off the arm.
4. Install the new blade assembly.
5. Return the wiper arm on the wind‐
shield.
6. Turn ignition to the ON position and
wiper arms will return to the nor‐
mal operating position.
Rear window wiper blade
2. Install the new blade assembly by
inserting the center part into the
slot in the wiper arm until it clicks
into place.
3. Make sure the blade assembly is in‐
stalled firmly by trying to pull it
slightly.
To prevent damage to the wiper arms
or other components, we recommend
that the wiper blade be replaced by an
authorized Kia dealer.
8-61
8
Maintenance
To Next Page
Loading...
