WARNING
Prior to working on the Interior
lamps, ensure that the OFF button
is depressed to avoid burning your
fingers or receiving an electric shock.
1. Using a flat-blade screwdriver, gen‐
tly pry the lens cover from lamp
housing.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap the
lens into place.
CAUTION
Be careful not to dirty or damage
the lens, lens tab, and plastic hous‐
ings.
Personal lamp bulb replacement
If the personal lamp (LED) does not op‐
erate, we recommend that you check
with an authorized Kia dealer.
Glove box lamp bulb
replacement
1. Using a flat-blade screwdriver, gen‐
tly pry the lamp assembly from in‐
terior.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Install the lamp assembly to interi‐
or.
Maintenance
8-124
To Next Page
Loading...
