• SSP supported device:
After a few moments, a screen is
displayed 6 digits passkey.
Check the passkey on your Blue‐
tooth
®
Wireless Technology de‐
vice and confirm.
The device name and passkey will
be displayed on the screen for up
to 3 minutes. If pairing is not com‐
pleted within the 3 minutes, the
mobile phone pairing process will
automatically be canceled.
3. Pairing completion is displayed.
In some mobile phones, pairing will
automatically be followed by con‐
nection.
It is possible to pair up to five Blue‐
tooth
®
Wireless Technology enabled
mobile phones.
Phone List
The names of up to 5 paired phones will
be displayed.
A [
] is displayed in front of the cur‐
rently connected phone.
Select the desired name to setup the
selected phone.
• Connecting a phone
Select [Phone List] Select mobile
phone
Select [Connect Phone]
1. Select a mobile phone that is not
currently connected.
2. Connect the selected mobile
phone.
3. Connection completion is dis‐
played.
If a phone is already connected, dis‐
connect the currently connected
phone and select a new phone to
connect.
• Disconnecting a connected phone
Select [Phone List] Select mobile
phone Select [Disconnect Phone]
1. Select the currently connected
mobile phone.
2. Disconnect the selected mobile
phone.
3. Disconnection completion is dis‐
played.
• Changing connection sequence (Prior‐
ity)
This is used to change the order (pri‐
ority) of automatic connection for
the paired mobile phones.
Select [Phone List]
Select [Priority]
Select No. 1 Priority mobile phone
1. Select [Priority].
2. From the paired phones, select the
phone desired for No.1 priority.
3. The changed priority sequence is
displayed.
5-51
5
Audio system
To Next Page
Loading...
