13. DRIVE TRAIN
13-7
MXU 500
Inspect the front drive shaft spline for wear
or damage.
If any damages are found, replace them with
a new one.
Inspect the front drive shaft for bends.
If any damages are found, replace them with
a new one.
ASSEMBLY
Do not attempt to straighten a bent shaft;
this may dangerously weaken the shaft.
＊
Circlip Case Side Join
Ɣ Wash all parts (except for the boots) before assembly,
clean the inside and outside of the boot with a cloth.
Ɣ Do not wash the boots in any commercially available
degreaser, such as gasoline or kerosene. Washing in a
degreaser causes deterioration of the boot.
＊
To Next Page
Loading...
