DVR Settings
Changing Display Options
Flashback3 & Flashback HD User’s Guide
Page 122 L3 Mobile-Vision 6.23.2017
8 P
ress to toggle the field value from ON to OFF.
9 P
ress four times to save your changes and exit this option.
Turning the Lights Display On/Off
This section describes how to turn the Lights display on/off so that it either appears
(Light trigger = ON) or does not appear (Light trigger = OFF) on the monitor during
a recording. This display indicates when the vehicle’s emergency lights are engaged.
1 M
ake sure the door to your DVR is open and Auto mode is off. (If necessary, press
the button until the light turns off.)
2 Press . The Main Menu displays.
3 If System is highlighted, proceed to the next step.
– OR –
If System is not highlighted, press the or button to advance to that option.
4 P
ress to select the System option. The System menu displays.
To Next Page
Loading...
