DVR Settings
Entering/Changing the Wireless Security Settings
Flashback3 & Flashback HD User’s Guide
L3 Mobile-Vision 6.23.2017 Page 191
10 Press to highlight the icon.
11 P
ress several times until the existing network name is deleted.
12 U
sing the following navigation buttons, highlight the first letter of your wireless
network.
....... Up
....... Down
....... Right
....... Left
13 Press . The selected character displays at the top of the screen.
14 Repeat steps 12 and 13 until the wireless network name is spelled out at the top of
your screen. If you need to add or delete a character, use the following buttons:
............Move forward one character
............Move back one character
............Delete previous character
To insert a space, use the icon.
15 Once the correct name displays, press four times to save your changes and exit
this option.
Entering a Wireless Password (WPA-PSK & WPA2-PSK mode only)
This section describes how to enter a wireless password for wireless modes WPA-
PSK and WPA2-PSK. If you selected any other security mode, these fields are not
required.
1 M
ake sure the door to your DVR is open and Auto mode is off. (If necessary, press
the button until the light turns off.)
2 Press . The Main Menu displays.
To Next Page
Loading...
