DVR Settings
Entering/Changing the Ethernet Options
Flashback3 & Flashback HD User’s Guide
Page 164 L3 Mobile-Vision 6.23.2017
Entering/Changing the Ethernet Gateway IP
This section describes how to enter or change the gateway IP address for the internal
Ethernet LAN interface. For more information on when/why you might need to
update this field, see “Entering/Changing the Ethernet Options” on page 158.
N
OTE: If you want your DHCP server to automatically provide the ethernet addresses
to this DVR, do not enter this field. Instead, turn the Ethernet DHCP option on, as
described in “Turning the Ethernet DHCP Option On/Off” on page 169.
1 M
ake sure the door to your DVR is open and Auto mode is off. (If necessary, press
the button until the light turns off.)
2 P
ress . The Main Menu displays.
3 P
ress the or button until Network is highlighted.
4 P
ress to select the Network option. The Network menu displays.
To Next Page
Loading...
