DVR Settings
Changing the Audio Settings
Flashback3 & Flashback HD User’s Guide
Page 74 L3 Mobile-Vision 6.23.2017
9 P
ress to toggle the field value to ON or OFF.
10 P
ress four times to save your changes and exit this option.
Turning the Record ‘Beep’ On/Off
This section describes how to turn the Record “beep” option on or off. If this setting
is on, the DVR will beep every 30 seconds while a Regular recording is in session.
1 M
ake sure the door to your DVR is open and Auto mode is off. (If necessary, press
the button until the light turns off.)
2 P
ress . The Main Menu displays.
3 If
System is highlighted, proceed to the next step.
– OR –
If System is not highlighted, press the or button to advance to that option.
4 P
ress to select the System option. The System menu displays.
To Next Page
Loading...
