L3 Mobile-Vision Flashback3 - Changing the Video Resolution Setting; Video Resolution Setting Options

DVR Settings
Changing the Date & Time Settings
Flashback3 & Flashback HD User’s Guide
Page 42 L3 Mobile-Vision  6.23.2017
Selecting the Current Time
The Flashback’s time display is set automatically by the Flashback unit’s GPS.
However, in the event of a GPS malfunction (such as a broken antennae), you can set
the Flashback time display manually, as described below.
1 M
ake sure the door to your DVR is open and Auto mode is off. (If necessary, press
the button until the light turns off.)
2 P
ress . The Main Menu displays.
3 If
System is highlighted, proceed to the next step.
– OR –
If System is not highlighted, press the or button to advance to that option.
4 P
ress to select the System option. The System menu displays.
5 P
ress to select the Date/Time option. The Date/Time screen displays.