DVR Settings
Changing the Record Settings
Flashback3 & Flashback HD User’s Guide
Page 44 L3 Mobile-Vision 6.23.2017
10 To change the minutes segment of the Time field, press , then proceed to the next
step. Otherwise skip to step 12.
11 U
se the or
buttons to move the minutes display higher or lower, respectively.
Once the desired number displays, proceed to the next step.
12 To
change the seconds segment of the Time field, press , then proceed to the next
step. Otherwise skip to step 14.
13 U
se the or
buttons to move the numeric display higher or lower, respectively.
HINT: You may want to set the seconds setting ahead by several seconds to give
yourself time to save the record.
14 Press four times to save your changes and exit this option.
Changing the Record Settings
The Flashback offers a number of different recording options, such as video
resolution, frames-per-second, Background Record, etc. Please review the options
discussed in this chapter to determine if the default settings are meeting your
agency’s needs.
F
or more information, see:
Adjusting Video Quality and File Size, below
Turning Background Record On/Off, page 54
Turning Stealth Mode On/Off, page 58
Changing the Pre/Post Record Settings, page 60
Selecting the Camera(s) for Channel 2, page 64.
Adjusting Video Quality and File Size
There is always a tradeoff between file size and quality. The sharper and clearer a
video is, the bigger its file size. If you are experiencing problems with bandwidth
speed and/or storage space, you may want to experiment with the video quality,
frames-per-second, and resolution settings to see if you can reduce your file sizes
somewhat without sacrificing too much quality.
F
or specific instructions, see:
Changing the Video Quality Setting, next page
Changing the Video Frames-Per-Second Setting for Regular Record, page 47
Changing the Video Frames-Per-Second Setting for Background Record, page 49
Changing the Video Resolution Setting, page 52.
To Next Page
Loading...