DVR Settings
Changing Display Options
Flashback3 & Flashback HD User’s Guide
L3 Mobile-Vision 6.23.2017 Page 129
Turning the Aux 1 Display On/Off
This section describes how to turn the Aux 1 Display on/off so that it either appears
(Aux1 trigger = ON) or does not appear (Aux1 trigger = OFF) on the monitor during
a recording. This display indicates when the Auxiliary 1 trigger is engaged, such as
the Crash Sensor.
1 Make sure the door to your DVR is open and Auto mode is off. (If necessary, press
the button until the light turns off.)
2 P
ress . The Main Menu displays.
3 If
System is highlighted, proceed to the next step.
– OR –
If System is not highlighted, press the or button to advance to that option.
4 P
ress to select the System option. The System menu displays.
5 P
ress twice to highlight the Display option.
To Next Page
Loading...
