DVR Settings
Changing Display Options
Flashback3 & Flashback HD User’s Guide
L3 Mobile-Vision 6.23.2017 Page 133
8 P
ress to select the Aux2 trigger field.
9 P
ress to toggle the field value to ON or OFF.
10 P
ress four times to save your changes and exit this option.
Turning the Speed Display On/Off
This section describes how to turn the Speed display on/off so that it either appears
(Speed trigger = ON) or does not appear (Speed trigger = OFF) on the monitor during
a recording. This display shows the vehicle’s current speed during videos. The speed
will display speeds in either miles-per-hour (default) or kilometers-per-hour (if
Metric Units
*
= ON).
1 Mak
e sure the door to your DVR is open and Auto mode is off. (If necessary, press
the button until the light turns off.)
2 P
ress . The Main Menu displays.
*
This Metric Units field is located on the System screen (Main Menu System System)
To Next Page
Loading...
