DVR Settings
Changing Display Options
Flashback3 & Flashback HD User’s Guide
L3 Mobile-Vision 6.23.2017 Page 141
Turning the Temp/Voltage Display On/Off
This section describes how to turn the on-screen temperature and voltage indicator on
or off, as shown below. This indicator displays the DVR’s internal voltage. By
default, this indicator is on.
1 M
ake sure the door to your DVR is open and Auto mode is off. (If necessary, press
the button until the light turns off.)
2 P
ress . The Main Menu displays.
3 If
System is highlighted, proceed to the next step.
– OR –
If System is not highlighted, press the or button to advance to that option.
4 P
ress to select the System option. The System menu displays.
voltage
To Next Page
Loading...