Peripherals
VLP2 Wireless Microphone
Flashback3 & Flashback HD User’s Guide
Page 18 L3 Mobile-Vision 6.23.2017
For information on L3 Mobile-Vision’s warranty and replacement options regarding
VLP2s, refer to the Flashback Digital Evidence Collection System warranty.
VLP2 Light Indicators
On the top of the VLP2, there are two light indicators: the Mute/Sync indicator, and
the Error/Battery indicator, pictured left.
These light indicators and their meaning(s) are described in the following table.
Indicator Color Meaning
Solid green Signal between the wireless mic and docking
station is good. The two devices are in sync.
Blinking orange Audio is temporarily muted. This occurs when
you hold the Record switch down while a
recording is in progress.
Blinking red
Signal between the wireless mic and docking
station is marginal and audio is likely interrupted.
This occurs because you are nearly out of range or
there is a barrier of some sort (metal, for example)
interrupting
the signal from the mic to the docking
station. To regain a reliable audio connection,
move back within range of the docking station.
Blinking red
Lapel mic has failed or battery is low. If the Lapel
mic fails, the audio source will automatically
switch to the unit’s internal mic.
Docking Station Light Indicators
In the front of the VLP2 charging station, there are two light indicators:
SYNC
and BATT
. These light indicators and their meaning(s) are described
in the table on the next page.
To Next Page
Loading...