DVR Settings
Entering/Changing the Ethernet Options
Flashback3 & Flashback HD User’s Guide
L3 Mobile-Vision 6.23.2017 Page 163
7 Press
to select the Netmask field.
8 To
enter/change the first segment of the IP address, proceed to the next step.
Otherwise use the button to advance to the first segment you wish to change.
9 If t
he current value of this IP segment is 0, proceed to the next step.
– OR –
If the current value of this IP segment is 1 – 255, use the or
buttons to move
the numeric display higher or lower, respectively. Next, skip to step 11.
10 Press
. The number 255 displays. Keep pressing the button until the desired
number displays. (If you overshoot the number, press to back up.)
11 Use th
e button to advance to the next segment you wish to enter/change.
12 Repeat
steps 9 – 11 until all four segments of the IP address are entered/updated.
13 Press
four times to save your changes and exit this option.
To Next Page
Loading...
