DVR Settings
Entering/Changing the Ethernet Options
Flashback3 & Flashback HD User’s Guide
Page 160 L3 Mobile-Vision 6.23.2017
5 Pr
ess to select the Ethernet option. The Ethernet screen displays.
6 Pr
ess to select the IP Address field.
7 To
enter/change the first segment of the IP address, proceed to the next step.
Otherwise use the button to advance to the first segment you wish to change.
8 If
the current value of this IP segment is 0, proceed to the next step.
– OR –
If the current value of this IP segment is 1 – 255, use the or
buttons to move
the numeric display higher or lower, respectively. Next, skip to step 10.
To Next Page
Loading...
