DVR Settings
Entering/Changing the Wireless Security Settings
Flashback3 & Flashback HD User’s Guide
Page 196 L3 Mobile-Vision 6.23.2017
7 P
ress to advance to the SSL Mode field.
8 P
ress to select the SSL Mode field.
9 P
ress to toggle the field value to ON or OFF.
10 P
ress four times to save your changes and exit this option.
11 R
eboot your DVR. To do so, move the red
AUTO/OFF switch on your DVR into the
down (
OFF) position. After approximately 30 seconds, move it back into the up
(
AUTO) position.
To Next Page
Loading...
