Upgrading from Flashback2 to Flashback3 or FlashbackHD
Flashback3 & Flashback HD User’s Guide
L3 Mobile-Vision 6.23.2017 Page 249
33 P
ress to advance to the Load Configuration option.
34 P
ress to select the Load Configuration option. The system copies the config.xml
file from the USB drive to your DVR. While this process takes place, a status message
will display on-screen.
O
nce the Loading… message disappears, the transfer is complete.
35 P
ress three times to exit this option.
36 Ra
ndomly check a few of your menu settings to verify that your Flashback2 settings
have successfully transferred to the Flashback3 or FlashbackHD.
To Next Page
Loading...
