Diagnostic aids 3-13
5041-030
LES Applications
This setting allows users to enable or disable the use of Lexmark Embedded Solutions (LES) applications.
Key Repeat Initial Delay
This setting determines the length of delay before a repeating key starts repeating. The default setting is 1
second. You can adjust the setting by .25 second increments.
Key Repeat Rate
This setting indicates the number of presses per second for repeating keys. The default setting is 15 presses per
second.
Clear Custom Status
This setting erases any custom messages the user has created for the Default or Alternate custom messages.
USB Speed
This setting determines the speed at which the USB port reads and writes data from flash drives. Auto is the
default setting. Setting the USB Speed to Full disables the hi-speed capabilities of the port.
USB PnP
Use this menu item to toggle between USB 1.0 and 2.0.
Automatically Display Error Screens
When on, the panel automatically displays any existing printer- or scanner-related IR after the device remains
inactive on the Home screen for a length of time equal to the Screen Timeout setting in the Timeouts section of
the General Settings Menu. Any IR that does appear on the panel will give the user the option of returning to the
Home screen without clearing it. From the Home screen, the user can initiate any other workflow or feature as
usual. Once the device returns to the Home screen, though, any existing IR again will appear after the device
remains inactive on the Home screen for a length of time equal to the Screen Timeout setting in the Timeouts
section of the General Settings Menu.
Exit Config Menu
Press Select to exit the Configuration menu and reboot the printer.
To Next Page
