6-2 Service Manual
5041-030
Scheduled maintenance
There are two maintenance kits available for the C925 printer:
300K paperpath maintenance kit (40X6372). It contains the following parts:
• 2 Paperfeed roll
• 2 Feed roll
• 2 Separator roll
• MPF roll
• MPF pad
• Upper registration roll
• Lower registration roll
• Paper exit roll
100K MPF maintenance kit (40X6457).This kit contains the MPF roll and a MPF pad.
In addition to these two kits, cleaning the paperfeed rolls in the paperfeed unit will fix many paperfeed issues.
Use a lint free cloth to clean the rolls. The cloth can be slightly dampened.
Transfer belt kit - The transfer belt kit (40X6011) is a customer replaceable part. Included in the kit is the transfer
roll kit. The approximate yield for the transfer belt kit is 100.000 cycles.
Fuser - The fuser is a customer replaceable part. There are two fusers available. The part numberfor the 110 V
fuser is 40X6013, and the 220 V part number is 40X6093. The aproximate yield for the fusers is 120,000 cycles.
Imaging units - There are separate imaging units for each color on the C925. The imaging unit is composed of
the developer, and phohtoconductor rolls. The approximate yield is 30,000 cycles.
Note: The imaging units are not FRUs.
To Next Page
