Lexmark C925 - Density Sensor Error

Diagnostic information 2-33
5041-030
Go Back
Previous
Next
132.00 Density sensor error
Step Action and questions Yes No
1 Is the density sensor cleaner stuck in place? Go to step 2 Release the
cleaner. Replace
if damaged.
2
Is the cable connecting the density sensor to CN14 on
the printhead controller board connected securely on
both ends?
Go to step 3. Securely connect
the cable.
3
Check the density sensor cable for continuity. Is there
continuity?
Go to step 4. Replace the
density sensor
cable.
4
Replace the density sensor. Does this fix the problem? Problem solved. Replace the
printhead
controller board.