Lexmark C925 - White Gaps Due to Poor Color Registration

Diagnostic information 2-11
5041-030
Go Back
Previous
Next
White gaps due to poor color registration
Step Action and questions Yes No
1 Ensure that the printer is level on a flat surface. Is the
surface level?
Go to step 3. Go to step 2.
2
Level the printer. Did this fix the issue? Problem resolved Go to step 3.
3
Set Auto Registration to On, and POR the printer. Did
this fix the issue?
Problem resolved Go to step 4.
4
Enter the configuration menu and run the color
alignment pages. See “Color Alignment” on
page 3-11. Adjust the alignment as needed. Did this fix
the problem?
Problem resolved Contact your
second level
support.