2-100 Finisher Service Manual
4024-XXX
5 Check the stapler unit cable assembly connection.
Are all the connections of the stapler unit cable
assembly connected properly?
Replace the
stapler unit
assembly.
Go to “Stapler
unit assembly
removal” on
page 4-56.
Replace the
connection.
6 Perform a stapled print test.
Does the error still occur?
Replace the
finisher controller
card assembly.
Go to “Finisher
controller card
assembly
removal” on
page 4-118.
Problem solved.
7 Perform a stapled print test. Replace the
printer engine
card assembly.
Refer to Printer
Service Manual.
Problem solved.
Step Check Yes No
To Next Page
Loading...
