Repair information 4-91
4024-XXX
Media diverter gate removal
1. Open the finisher front door assembly.
2. Remove the rear upper cover. See “Rear upper cover removal” on page 4-24.
3. Open the lower pinch guide assembly (A) to the right.
4. Open the upper pinch guide assembly (B) to the right.
5. Remove the media diverter gate solenoid. See “Media diverter gate removal” on page 4-91.
6. Remove the link (C).
7. Move the media diverter gate (D) toward the rear, to the right, and forward, as shown.
8. Remove the media diverter gate.
To Next Page
Loading...
