1-2 Finisher Service Manual
4024-XXX
• Stacker media bin block to stack media
Media size and weight
The following shows media sizes and weight that the finisher can handle, as well as applicable functions for each
media size.
The printer and the finisher handle different media sizes and weights. For this reason, if the printer has printed
media that the finisher cannot handle, the exit 1 diverter gate in the printer is switched to eject the media from
Exit 2 onto the bridge unit assembly. Refer to the Printer Service Manual for additional information on the printer.
Media size/orientation and applicable functions
Media
description
Size
Short edge
first (SEF)/
Long edge
first (LEF)
Top
tray
Stacker
Stack Stack
Offset
stack
Punch
1
Staple
B5
182 x 257 mm
SEF Yes No No No No
LEF Yes Yes Yes Yes
a(2)
Yes
Executive 7.25 x 10.5 in.
184.2 x 27 0 mm
SEF Yes No No No No
LEF Yes Yes Yes Yes
a(2,3,4)
No
Letter 8.5 x 11 in.
215.9 x 279.4 mm
SEF Yes Yes Yes Yes
a(2)
Yes
LEF Yes Yes Yes Yes
a(2,3,4)
Yes
A4
210 x 297
SEF Yes Yes Yes Yes
a(2)
Yes
LEF Yes Yes Yes Yes2
,a(3,4)
Yes
Folio (foolscap) 8,5 x 13 in. SEF Yes Yes Yes Yes
a(2)
Yes
Legal 8.5 x 14 in. SEF Yes Yes Yes Yes
a(2)
Yes
B4
257 x 364 mm
SEF Yes Yes Yes Yes
a(2)
Yes
Bridge unit asm
Punch unit
Stapler
Stacker media bin
Compiler tray
To Next Page
Loading...
