Repair information 4-109
4024-XXX
Upper pinch guide assembly removal
1. Open the finisher front door assembly.
2. Remove the rear upper cover. See “Rear upper cover removal” on page 4-24.
3. Remove the drive motor (buffer/transport). See “Drive motor (buffer/transport) and belt (buffer/
transport) removal” on page 4-115.
4. Remove the three screws securing the hinge of the upper pinch guide assembly (A) on the rear of the
finisher.
5. Move the upper pinch guide assembly hinge from the rear of the finisher.
6. Remove the upper pinch guide assembly (A) from inside of the finisher in the direction of the arrow.
To Next Page
Loading...
