Lexmark W850 - Media Compiler Unit Assembly Removal

Repair information 4-69
4024-XXX
Media compiler unit assembly removal
1. Remove the finisher front door assembly. See“Finisher front door assembly removal” on page 4-27.
2. Remove the rear upper cover. See “Rear upper cover removal” on page 4-24.
3. Remove the rear lower cover. See “Rear lower cover removal” on page 4-23.
4. Remove the upper media bin assembly. See “Upper media bin assembly removal” on page 4-20.
5. Remove the upper media bin vertical cover. See “Right eject cover removal” on page 4-21.
6. Remove the stapler unit frame. See “Stapler unit frame removal” on page 4-54.
7. Remove the media eject clamp motor assembly. See “Media eject clamp motor assembly removal” on
page 4-66.
8. Remove the media eject unit assembly. See “Media eject unit assembly removal” on page 4-59.
9. Remove the media eject motor assembly. See “Media eject motor assembly removal” on page 4-78.
10. Loosen the four screws securing the plate (A) to the finisher.
11. Move the plate to the right and outward.
12. Remove the plate.
A
Rear