2-10 Finisher Service Manual
4024-XXX
Remove paper from
Bin 1
Finisher upper media
bin full
The upper media bin has reached maximum capacity.
Go to “Finisher upper media bin full” on page 2-91.
Remove paper from
bin 2
Stacker set over count When the stapled media exceeds the specified value
be able to stack on the stacker bin.
Go to “Stacker set over count failure” on page 2-99.
Remove paper from
Bin 2
Stacker media bin full
(no mix)
The stacker media bin has reached maximum capacity
(same media size).
Go to “Stacker media bin full (no mix)” on
page 2-96.
Remove paper from
Bin 2
Stacker media bin full
(mix size)
The stacker media bin has reached maximum capacity
(mixed media size).
Go to “Stacker media bin full (mix size)” on
page 2-94.
To Next Page
Loading...
