Lexmark X925 - Page 151

Diagnostic aids 3-19
7541-03x
HARDWARE TESTS
Panel Test See “Panel Test” on page 3-21
Button Test See “Button Test” on page 3-21
DRAM Test See “DRAM Test” on page 3-21
Serial 1 Wrap (if installed) See “Serial Wrap Test” on page 3-22
USB HS Test Mode See
INPUT TRAY TESTS (if installed)
Feed Test See
DEVICE TESTS (if installed)
Quick Disk Test See “Quick Disk Test” on page 3-23
Disk Test/Clean See “Disk Test/Clean” on page 3-23
Flash Test See “Flash Test” on page 3-24
PRINTER SETUP
Defaults See “Defaults” on page 3-24
Prt Color Pg Count See “PAGE COUNTS” on page 3-25
Prt Mono Pg Count
Perm Page Count
Serial Number See “Serial Number” on page 3-25
Model Name See “Model Name” on page 3-25
Configuration ID See “Configuration ID” on page 3-25
Par 1 Strobe Adj (if installed) See
REPORTS
EVENT LOG
Display Log See “Display Log” on page 3-26
Print Log See “Print Log” on page 3-27
Clear Log See “Clear Log” on page 3-27
SCANNER TESTS
Scanner Calibration Reset See “Scanner Calibration Reset” on page 3-28.
ASIC Test See “ASIC Test” on page 3-28.
Feed Test See “Feed Test” on page 3-28.
Sensor Test See “Sensor Test” on page 3-28.
ADF Magnification See “ADF Magnification” on page 3-28.
EXIT DIAGNOSTICS