1-12 Service Manual
7541-03x
Fax features
Feature Notes
Fax preservation Faxes are preserved over power cycle
Color fax Enable color scans
Auto convert color to mono fax
Enable color fax receive:
• When on, the sending device transmits in color and the
receiving device prints in grayscale.
• When off, the sending device converts and transmits the job as
a mono job.
Fax content Type: text, graphics, text/photo, photo
Source: color laser, black/white laser, inkjet, photo/film, magazine, newspaper,
press, other
Original size All sizes supported by device, including mixed letter/legal
Dial mode Touch tone
Pulse
Custom job scanning Only appears if installed on hard drive
Scan preview Only appears if installed on hard drive
Fax cover page Includes: to, from, message, footers, logo, and total pages
Fax number masking Active masking
Maximum speed Settings for both Send and Receive
Delayed send Supported
Block junk fax banned
fax list
Based on Caller ID or Remote Station ID
Fax shortcuts Average shortcut includes: 25 characters for name, 10 characters for number,
and four characters for shortcut ID.
Shortcuts can contain one phone number or multiple numbers. Each number is
a location; see the Preferences area for the maximum number of locations. xxx
Broadcast fax Maximum number of locations is 400
Fax forwarding Incoming faxes may be forwarded to the following:
• Fax—using one fax shortcut
• Email—using one email shortcut
• FTP—using one FTP shortcut
• LDSS
• eSF—supported via custom application
Any fax resolution that can be received can also be forwarded.
Caller ID Available if subscribed to caller ID from phone provider
Manual fax Disabled by default
Fax from PC Supported using PostScript driver
Fax print holding Appears only if installed on hard drive
Fax logs Transmission log
Receive error log
Fax call log
Fax job log
Distinctive ring
selection
Available if subscribed from/configured through phone provider
To Next Page
Loading...
