Diagnostic information 2-57
7541-03x
841.02 Delayed interrupt detected
841.03 Failed indirect register test
841.04 Failed external DRAM test
841.05 Image pipe time-out
Step Questions/actions Yes No
1 POR the device a few times. Did the error re-occur? Go to step 2. Problem resolved
2
Update the firmware. Before doing so, contact your
second level support for the correct level firmware to
flash the device with. Did this resolve the issue?
Problem resolved Go to step 3.
3
Replace the RIP board. Did this fix the issue? Problem resolved Contact second
level support.
Step Questions/actions Yes No
1 POR the device a few times. Did the error re-occur? Go to step 2. Problem resolved
2
Replace the RIP. Did this fix the issue? Problem resolved Contact second
level support.
Step Questions/actions Yes No
1 POR the device a few times. Did the error re-occur? Go to step 2. Problem resolved
2
Replace the RIP. Did this fix the issue? Problem resolved Contact second
level support.
Step Questions/actions Yes No
1 POR the device a few times. Did the error re-occur? Go to step 2. Problem resolved
2
Replace the RIP. Did this fix the issue? Problem resolved Contact second
level support.