General information 1-13
7541-03x
Scanner specifications
Sound control Ringer volume
Speaker volume
Speaker mode—On, On until connected, Off
Fax server Fax server mode will send the scanned fax job to the fax server as an email,
where it will then be sent to the receiver. The device should be tested for
configurability and compatibility with the deserved third fax server product (for
example, Biscom, Equisys-ZetaFax, OMTool, Captaris-RightFax, or Tobit-
Faxware).
Scanner type Color flatbed scanner with ADF
Scan technology Charge Coupled Device (CCD)
Light source White LED “Instant On”
Number of light sources 1 LED array per CCD module
ADF scanner
ADF type Re-circulating (Dual Pass) Automatic Document Feeder (RADF)
Scanner ADF
document input and
output capacity
100 sheets, 20 lb. (75 g/m
2
) bond
Scanner media depth
(thickness)
Maximum: 0.11mm
Minimum: 0.08 mm
Scanner media weight Maximum: 32 lb (120 g/m
2
)
Minimum: 16 lb (60 g/m
2
)
Document size Maximum: 11.8 x 25 in. (299.72 x 635 mm) Short Edge Feed (SEF)
Minimum: 4 x 5.04 in. (101.6 x 128.02 mm) SEF
Document size sensing Yes—length and width in ADF
Document Sensing Yes—ADF paper present LED and on/off settable beep
Flatbed scanner
Max document size 11 x 17 in. (279.4 x 431.8 mm)
Document size sensing Yes—paper length sensing only on flatbed
Print engine
Print technology Color LED
Duplex output Standard
Paper feed orientation Short Edge Fed and Long Edge Fed
Fax
Modem Built-in Group 3-compatible, full function fax, 33,600 bps, Max V.34 Half Duplex
Feature Notes
To Next Page
Loading...
