Lexmark X925 - Paperfeed Maintenance Kit Removals; Pick Roll Removal

4-182 Service Manual
7541-03x
Paperfeed maintenance kit removals
Pick roll removal
1. Remove the paperfeed unit. See “Power supply fan removal” on page 4-55.
2. Depress the tab (A) and remove the PE sensor actuator.
3. Pull back the tab on the pick roll (B) and remove the pick roll.
Paperfeed roll removal
1. Remove the paperfeed unit. See “Paper feed unit removal” on page 4-68.
2. Remove the pick roll. See “Pick roll removal” on page 4-182.
3. Remove the nylon retainer clip (C).
4. Remove the feed roll.