L-Gate User Manual 16 LOYTEC
Version 3.2 LOYTEC electronics GmbH
Figure 5: Enter admin as the default administrator password.
6. The Config menu opens. Click on Port Config and change to the tab Ethernet. The
TCP/IP settings are selected as shown in Figure 6. Enter the IP address, the IP
netmask, and IP gateway for this device.
Figure 6: Enter IP address and gateway.
7. Press Save Settings and then reset the device by selecting Reset in the highlighted
text. This changes the IP settings of the device.
2.2.3 BACnet Configuration
To configure the BACnet interface, at least the Device ID and the Device Name must be
configured (see Figure 7).
To Next Page
Loading...