Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Features
Page 266Display
Feature Description
Sample Displays
Analog Multiline MLX
Inspect An MLX telephone user can
inspect the contents of
programmed buttons by
pressing the Inspct button and
then pressing the programmed
button. In most cases, the
display shows the feature or
line assigned to the button. (In
Release 2.0 and later systems,
inspecting a Last Number Dial
or Saved Number Dial button
shows the number stored on
the button.)
No display
$FFRXQW&RGH
Users can also inspect
incoming calls or their calls on
hold. The display shows
standard call information (see
“Receiving Calls,” in this table).
If a user inspects a line that
someone else is using, the
display shows that the line is in
use.
No display
No display
);1<& (outside)
'$11<[ (inside)
,Q8VH
Last
Number
Dial
When a user presses a
programmed Last Number Dial
button, the user sees digits on
the display as if dialing them
from the dialpad.
In Release 2.0 and later
systems, inspecting a Last
Number Dial button shows the
stored number.

No display


Messaging When a user sends a message
to another telephone, a feedback
message appears.
When a user tries to retrieve
messages and the message box
is empty, the display indicates
that there are no messages.
0VJ6HQW&$5/26
&DQQRW6HQG
0HVVDJH%R[)XOO
1R0HVVDJHV
0VJ6HQWWR&$5/26
&DQQRW6HQG0HVVDJH
0HVVDJH%R[)XOO
1R0HVVDJHV

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English