Micromeritics ACCUPYC II 1345 - Page 144

10 About Calibration
Field or Button
Description
Previous / Entered /
Measured
[checkbox]
Select the method for calibrating the cell and expansion volumes.
Previous. Uses the current values.
Entered. Enables the fields for the cell and expansion volumes.
Measured. Measure the cell and expansion volumes using a
reference standard.
Start [button]
Begins the first segment of the volume offset calibration.
Volume of Calibration
Standard [textbox]
The volume of the standard used for the previous calibration.
For fields and buttons not listed in this table, see Common Fields and But-
tons on page3 - 2.
Calibrate Volume Scale (continued)
10 - 10
AccuPyc II 1345 Operator Manual
134-42851-01 (Rev A) — Jan 2021