Micromeritics ACCUPYC II 1345 - Page 75

Field or Button
Description
Cup mass [textbox]
Displays when Show Cup Properties in option presentation is enabled.
Enter the cup mass.
Geometry [button]
Enter material properties when using the FoamPyc application.
Entered. Select to enter the geometric volume and when using
Correction using cell dimensions selection. The Active Area is the total
geometric surface area of the sample - excluding any sides that
contain a skin.
Calculate. Select the shape of the sample and enter the dimensions.
Number of Pieces. The number of pieces making up the sample.
Material Parameters
[button]
See Material Parameters on page4 - 6.
Operator [textbox]
Enter operator identification information. This field label may have
been renamed or may not display if modified in Options > Default
Method.
Sample [textbox]
Enter a sample description.
Sample cup
[drop-downbox]
Displays when Show Cup Properties in option presentation is enabled.
Select a sample cup file from the drop-down list or click Edit to create
and save a new file for sample cup properties. See Sample Cup on
page4 - 5.
Sample Files for Pycnometry Analyzers
Create Sample Files
AccuPyc II 1345 Operator Manual
134-42851-01 (Rev A) — Jan 2021
4 - 3